A wood fence gives protection, security and an incredible point of convergence for your property. Regular wood fence support is essential to keep up the stylish of the fence and prolong its life. Staining should be done every two to three years to safeguard the look and capacity of the fence. In any case, the support process will rely upon a few elements.
Today’s article is sponsored by Frisco Fence Staining
Wood Fence Upkeep
When a fence is appropriately checked, should keep going for something like 10 years. To deal with it, you need to prolong its life span and keep it looking incredible:
- Always replace decaying woods at the earliest opportunity.
- Fence posts and any sheets that come into contact with the ground should be wood that is treated or that generally spoils safe.
- Paint or stain a fence when it starts to hint at wear.
- Do not ignore the preparation steps while applying the wood treatment. Setting up the wood legitimately will altogether influence the result and life span of the wood treatment.
- A screwy fence post shows poor balance, disintegration issues, or decaying wood. Continuously examine when things don’t look right.
- Hammer all the nails that are protruding and fix or replace any free or missing screws.
How often should I stain my fence in Texas?
A wood fence should be treated every 2 to 3 years depending on the wood type. Factors that influence this support interim include:
- The fence is facing south and exposed to extreme UV light
- There is a form or mold on the boards
- Boards are rotting
- The wood type
- Softwoods, for example, pine needs more incessant upkeep than wall produced using hardwoods like oak.
- Naturally decay safe wood, for example, dark insect or cedar can go longer so long as they are being well treated. Simply make sure the wood is good quality.
Tips for staining your Fence
Do not stain new fences immediately. The wood type used for your fence will determine when you should paint it. When wet wood is used, it cannot allow the stain in to give it protection. A decent standard guideline spread some drops of water on the wood, in the event that it dabs up, it is still excessively wet. On the off chance that the water soaks into the wood, it’s prepared for stain. Utilize the above-mentioned tips as general rules. The wood you purchase may not be extremely wet or you may live in a parched atmosphere where it’ll dry out immediately unlike when it comes to a moist atmosphere.
After the wood is ready, before you apply any paint, wash off dust and dirt from the wood. To give the fence a new look, gently sand the wood to expel the dark shading and give it one more day before continuing. It might not be possible to prevent natural weathering of the fence over time but it is possible to slow the process by protecting the wood. Use stainless steel nails and other metals because they won’t rust and also they resist warping.
We hope you have found this article to be useful and full of tips to help you with staining your fence. If you have any questions, please contact us. We love hearing from our readers and will be glad to speak with you. If you have any tips of your own, please submit them and if we use them on our site we will give you full credit. We also ask that you visit our sponsor’s Fence Stain Contractors in Frisco.